Yukon, Tahoe, & Suburban Suspension Systems

Rec-Kit
Tire-Kit
Hi-Lift
ARB
Ultimate Recovery Gear Kit!

Free Wheelin' Video with Purchase of Kit!
more info

Catalog Home > Suspension Lift Kits > BDS Suspensions > Chevrolet/GMC BDS Suspensions

Yukon, Tahoe, & Suburban Suspension Systems

  • One-piece high clearance front & rear crossmembers made from 1/4" thick steel
  • Differential skid plate and compression struts included for off-road protection
  • Heavy duty steering knuckle included to correct steering geometry and ease installation
  • Increased caster for more control
  • Stainless front brake lines included


    yutasusu

    • 6" Front/ 5" Rear 1992-1998 Chevy/GMC Yukon, Tahoe 2 Door 6 Lug & Suburban 6 Lug 4WD


    Lift is achieved via a Front bracket kit and a Rear Block & Add-a-leaf kit.
    Kit includes:
  • Front box kit 1 of 3; 021602
  • Front box kit 2 of 3; 021603
  • Front box kit 3 of 3; 021604
  • Rear box kit; 011459
  • Front shock; 55600
  • Rear shock; 55609

    Recommended accessories:

  • Stainless steel rear brake line; 101009
  • 4X4 Posi-Lok; PSL600 (replaces factory unit with cable controlled actuator)
  • 4X4 Perm-Lok; PSL1000 (permanently engages the front axle)
  • Rear sway bar extension; 124002
    See Notes: 1,2,3,4,5,6,7
    subds153xhb$2,040.64
    • 6" Front/ 5" Rear 1992-1998 Chevy/GMC Yukon, Tahoe 4 Door 6 Lug 4WD


    Lift is achieved via a Front bracket kit and a Rear Block & Add-a-leaf kit.
    Kit includes:
  • Front box kit 1 of 3; 021602
  • Front box kit 2 of 3; 021603
  • Front box kit 3 of 3; 021604
  • Rear box kit; 011459
  • Crossmember kit; 121002
  • Front shock; 55600
  • Rear shock; 55609

    Recommended accessories:

  • Stainless steel rear brake line; 101009
  • 4X4 Posi-Lok; PSL600 (replaces factory unit with cable controlled actuator)
  • 4X4 Perm-Lok; PSL1000 (permanently engages the front axle)
    See Notes: 1,2,3,4,5,6,7
    SUBDS154H$2,235.05

    • NOTES:

    1. Requires exhaust modification.
    2. Special tool required to unload/load torsion bars. Not available through BDS.
    3. Requires frame bracket modification and differential mount modification.
    4. Not recommended for long box exteded cab models due to crossmember interference.
    5. All models equipped with auto-trac may require a new front driveshaft. The auto-trac New Process 246 transfer case can be identified by the silver dollar sized plaque on the rear of the transfer case that reads "NP246". The dash mounted display will display the Auto 4WD symbol. NP243 is not auto-trac.
    6. Aftermarket wheels required with 4-1/2" backspacing or less.
    7. System will not work on '88-'95 vehicles equipped with spindle mounted front ABS sensor. This system will work with '95 and later hub mounted ABS.


    Copyright©2004 4x4Connection.com
    Terms and Conditions
    4x4 Text Links     		HACKER SAFE certified sites prevent over 99.9% of hacker crime.