BDS Suspensions carry the best warranty on the market. The .75", 1.75", 2" and 3" BDS Pro-Ride Suspensions for the Jeep Grand Cherokee ZJ is the perfect system for those looking for improved off-road performance as well as increased wheel travel.
Shock boots are not included. Ask your sales rep for details.
.75" BDS Suspension System
Kit includes:
.75" Front & Rear Coil Spring Spacers; 024100
Front Shocks; 55979
Rear Shocks; 55900
Recommended Accessories:
Steering Stabilizer; 55401
1.75" BDS Suspension System
Kit includes:
1.75" Front & Rear Coil Spring Spacers; 024202
Front Shocks; 55979
Rear Shocks; 55950
Recommended Accessories:
Steering Stabilizer; 55401
2" BDS Suspension System
Kit includes:
Front Coil Springs; 034211
Rear Coil Springs; 034208
Front Shocks; 55979
Rear Shocks; 55950
Recommended Accessories:
Steering Stabilizer; 55401
Extended Anti-Sway Bar Links; 124306
See NOTES below: 2
3" Suspension Systems
Kit includes:
Front Coil Springs; 034301
Rear Coil Springs; 034208
Front Track Bar Relocation; 124007
Front Sway Bar Links; 124306
Front Shocks; 55965
Rear Shocks; 55950
Recommended Accessories:
Steering Stabilizer; 55401
Front Lower Control Arms(pair); 124307
See NOTES below: 1,2
4.5" BDS Suspension System
Kit includes:
Front Coil Springs; 034453
Rear Coil Springs; 034409
Complete Box Kit; 014453
Transfer Case Drop Kit; 124026
Front Shocks; 55965
Rear Shocks; 55920
Complete Box Kit includes: Front and Rear adjustable upper control arms, front and rear lower control arms, front adjustable track bar, rear track bar relocation system, front ultimate sway bar disconnects, rear sway bar links, front stainless Kevlar lined brake lines, bump stop extensions, misc hardware.
Recommended Accessories:
Steering Stabilizer; 55401
See NOTES below: 3,4
NOTES:
Measure front driveshaft, over 24.5" - no modifications should be necessary, 20-24" you may need to change to spicer type joint if vibration occurs. If driveshaft is less than 20" then a spicer type joint is required and vibration may persist.
Vehicles equipped with V8 may not achieve stated height.
If you do not want to drop the transfer case, an aftermarket slip yoke eliminator and CV style driveshaft is required.
IF equipped with CV style drive shaft mount at front pinion, then a new spicer type joint is required to eliminate vibration.